Real-Time DAQ Systems Ideal for Industrial Process Monitoring CHESTERLAND OH—June 25, 2012
CAS DataLoggers recently supplied the real-time data acquisition system for a manufacturer who needed to perform vibration monitoring on their plant’s manufacturing equipment as demands on machine up-time increased and quick breakdown response times became critical. Management began searching for a system ...
Margie Smith-Krantz Authors: Date: Oct. 3-6, 2001
Abstract New low styrene unsaturated polyester resins have been de- veloped for the filled market segment. These polyesters maintain viscosity and thix indexes of conventional systems while offering dramatic reduction in styrene content.
The next generation resin system has a styrene content of 30%. Although the styrene content has been ...
Liquid Sprays in Consumer Product Manufacturing
Liquid Sprays & Consumer Products Choosing the Right 2 Pumping System CIP/SIP Systems 3
Control Agglomerates 3 Adjusting Spray Multiple Processes in 3 One Mixer Optimization and 4 Automation Liquid Spray 5 Application Gallery Case Studies 5
Many of the products we use every day are manufactured using sprays in the product mix. These range from ...
Grant’s Portable Universal Input SQ2010 Datalogger
CAS DataLoggers recently provided the datalogging solution for a local environmental group monitoring the level of a river against rainfall. The river rose and fell visibly throughout the year and often caused property damage in periods of heavy rain, so a monitoring project was organized to find out just how much it varied and to correlate data ...
The solubility, CIELAB color, matrix viscosity, air release and leveling properties of highly filled unsaturated polyester matrices made with different forms of Titanium di- oxide colorant will be evaluated. A comparison of dry Tita- nium dioxide and color dispersions of TiO2 in various disper- sion vehicles will be studied. With the advent of automated casting machines, there is an increased ...
Curing of coatings and composites induces polymerization shrinkage stresses, which can lead to strain at the interface. The primary approach to overcome this inherent problem has been to optimize the various ingredients used to make these materials. Find out how to improve the properties of methacrylate-based dental composites via the introduction of a new monomer referred to as X-852-0000.
The Development of a Marble Clear Gel Coat with Improved Performance Properties
Abstract This paper describes the development and opti-mization of a clear gel coat with improved performance in thermal cycle testing, color, and cure characteristics. The entire process will be outlined beginning with the development of a new polyester resin as the backbone of the new clear and ending with an ...
Temperature affects chemical behavior, particularly in organolithium compounds. Proper temperature selection is essential during transport, storage, addition and reaction for achieving consistent results. Read best practices for selecting the appropriate conditions for handling and utilizing organolithiums at lower temperatures.
Company descriptions and contact
information are quoted
from the company's website or other promotional information. JAZ'D is not responsible for
the accuracy
of this information. Unless specifically noted, JAZ'D is not sponsored by, affiliated with
or otherwise
connected with any of the listed companies.
