Esstech Inc.

Esstech Inc. Products

1, 12 - Dodecanediol dimethacrylate 1, 12 - Dodecanediol dimethacrylate has a hydrophobic backbone that increases its molecular mobility. DDDMA is

1, 12 - Dodecanediol dimethacrylate 1, 12 - Dodecanediol dimethacrylate has a hydrophobic backbone that increases its molecular mobility. DDDMA is

1, 3 - Butanediol Dimethacrylate A cross-linking, functional monomer that can be involved in adjusting polymer properties. Shipped in standard

1, 3 - Glycerol Dimethacrylate This product is commonly used in adhesive and sealant formulations. Shipped in standard packages of 8, 40, 100 and 440

1, 6 - Hexanediol Dimethacrylate with BHT This product is a hydrophobic dimethacrylate. It assists with cross-linking and can be used in sealants,

1, 6 - Hexanediol Dimethacrylate with HQ This product is a hydrophobic dimethacrylate. It assists with cross-linking and can be used in sealants,

1, 6 - Hexanediol Dimethacrylate with MEHQ This product is a hydrophobic dimethacrylate. It assists with cross-linking and can be used in sealants,

2, 2, 2 - Trifluoroethyl Methacrylate This high purity, low refractive index material is often used in photocrosslinkable compositions and contact

2-Ethoxyethyl Methacrylate EOEMA is a high purity monomer often used for, but not limited to contact lens applications. Shipped in standard packages

2-Methoxyethoxyethyl Methacrylate This product has a variety of applications including: coatings, pressure senstive adhesives and cosmetics. Shipped

2-Methoxyethoxyethyl Methacrylate with 500 ppm BHT This product has a variety of applications including: coatings, pressure senstive adhesives and

4-methacryloxyethyl trimellitic anhydride Synonyms: 4-methacryloxyethyl trimellitic anhydride, 4-methacryloxy-ethyl trimellitate anhydride, 4-META,

50% PMGDM in Acetone Pyrometllitic glycerol dimethacrylate or PMGDM is an excellent liquid adhesive system. Applications exist in both the dental and

50% PMGDM in Triethylene Glycol Dimethacrylate Dissolving pyromellitic glycerol dimethacrylate or PMGDM in triethyleneglycol dimethcrylate rather than

Aliphatic Urethane Acrylate This material is highly reactive with an excellent cure speed. It cures to form a flexible polymer. Shipped in standard

Aluminosilicate Glass The refractive index of aluminosilicate glass filler matches that of bisGMA and is very close to our X-970-0000. It has a

Barium Boroaluminosilicate Glass Barium Borosilicate glass filler or BBAS has been traditionally used in the classic dental composite systems

Bariumsilicate Glass Barium Silicate glass is an inorganic filler with a high refractive index of 1.580. It also has a high coefficient of thermal

BISGMA Monomer Bisphenol A Glycidyl Methacrylate or bis-GMA is a high viscosity resin that has been used in dental formulations for years. Our bis GMA

Diethyleneglycol Dimethacrylate with 100 ppm BHT This product is a hydrophilic, cross-linking monomer. It can be used in adhesives and coatings

Diethyleneglycol Dimethacrylate with 100 ppm MEHQ This product is a hydrophilic, cross-linking monomer. It can be used in adhesives and coatings

Diethyleneglycol Dimethacrylate with 60 ppm HQ This product is a hydrophilic, cross-linking monomer. It can be used in adhesives and coatings

Distilled and Column-Treated EDMA with HQ This difunctional monomer acts as a cross-linking agent between polymer chains. It has similar reactivity to

Distilled and Column-Treated EDMA with HQ 99.5+% This difunctional monomer acts as a cross-linking agent between polymer chains. It has similar

Distilled and Column-Treated EDMA with MEHQ This difunctional monomer acts as a cross-linking agent between polymer chains. It has similar reactivity

Distilled Dihydroxyethyl para-Toluidine DHEPT is a solid amine that is ideal for chemical-cure systems using peroxides. It has lower color than the

DSS Silanated Barium Boroaluminosilicate Glass Esstech DSS™ Glass features optimized levels of silane and improved hydrophobicity, properties which

DSS Silanated Barium Boroaluminosilicate Glass Esstech DSS™ Glass features optimized levels of silane and improved hydrophobicity,  properties  which 

DSS Silinated Barium Boroaluminosilicate Glass Esstech DSS™ Glass features optimized levels of silane and improved hydrophobicity,  properties  which 

Esstech Inc Products all products

Ethoxyethoxyethyl Methacrylate EOEOEMA is a low odor monomer often used in cosmetic applications along with curable adhesives. Shipped in standard

Ethoxyethoxyethyl Methacrylate EOEOEMA is a low odor monomer often used in cosmetic applications along with curable adhesives. Shipped in standard

Ethoxylated Bis Phenol A Dimethacrylate This form of EBPADMA has 2 to 4 units of ethoxylation and is sometimes referred to bis-EMA. It is often used

Ethoxylated BisPhenol A Dimethacrylate (EO=10) This form of EBPADMA has 10 units of ethoxylation. Polymerization of this material results in a rigid

Ethoxylated BisPhenol A Dimethacrylate (EO=30) This form of EBPADMA has 30 units of ethoxylation. It has a high degree of conversion neat and when

Ethoxylated BisPhenol A Dimethacrylate (EO=8) This form of EBPADMA has 8 units of ethoxylation. Increasing the ethoxylated chain length increases the

Ethoxylated (EO=6) Bis Phenol A Dimethacrylate This form of EBPADMA has 6 units of ethoxylation. Increasing the ethoxylated chain length increases the

Exothane 10 Exothane 10 provides low shrinkage, good conversion and enhanced toughness. Exothane 10’s high viscosity enables it to be a rheological

Exothane 24 Exothane 24 has increased cross-linking capacity and is low in color and viscosity. Neat polymers of Exothane 24 have very high Shore D

Exothane 26 The homopolymer of Exothane 26 has the unique ability to re-adhere to itself at lower tensile strength. Exothane 26 is relatively low in

Exothane 32 Like Exothane 26, Exothane 32 also has the ability to temporarily re-adhere to itself after breaking. It is very low in color and

Exothane 8 Exothane 8 is a low color urethane that is a viscous liquid at room temperature. Upon cure, Exothane 8 creates a shiny, “soft” yet tough

Exothane 9 Exothane 9 or PEG 400 Extended Urethane Dimethacrylate is commonly used in photo-cure applications. The PEG 400 backbone creates a flexible

Extended Urethane Dimethacrylate Our extended UDMA is commonly used in light cure systems. Its PEG 400 portion creates a more flexible polymer upon

FIT 852™ Resin FIT 852 Resin is a novel low shrink urethane monomer based on Esstech's proprietary methacrylate technology.  FIT possesses a

GDMA/Succinate Adduct By combining GDMA with succinic acid, we have created another alternative to common dental adhesives, GDMA  succinate.

Glass Ionomer Cement Liquid Copolymer 50% Solids Our GIC liquid works well when paired with an alumino-fluoro-silicate glass filler. The combination

Glycerol Dimethacrylate/Maleate Adduct GDMA maleate is a leading edge technology combines the reactivity of maleic acid and GDMA to create a novel

HEMA, Direct Casting Grade Hydroxyethyl methacrylate or HEMA is a high purity methacrylate monomer with many applications including: contact lenses,

HEMA, High Purity Grade, High Stability, Optical This HEMA has the adhesive qualities and multiple applications of other hydroxyethyl methacrylates

HEMA Phosphate HEMA phosphate is a liquid adhesive system that bonds to and interacts with calcium-containing substrates.

Hydroxyethyl Methacrylate 95% min HEMA is a primary alcohol making it a good adhesion promoter in anaerobic adhesives. The purity level of this

Hydroxypropyl Methacrylate HPMA HPMA or hydroxypropyl methacrylate contains a secondary alcohol group and is often considered to have less allergic

Isobornyl Acrylate This material is often used to increase wear resistance, gloss and hardness. It is highly reactive and used in increasing the Tg of

Isobornyl Methacrylate The cyclic group of this product allows it to react in free radical polymerization while also acting as an excellent diluent.

Magnesium Salt of N-tolylglycine glycidylmethacrylate, NTG-GMA The Magnesium Salt of this surface active monomer (NTG-GMA) has similar adhesive

Methacryloxyethyl Maleate HEMA maleate is a carboxylic acid-containing methacrylate that can function as an alternative to PMDM. It has been used in

Methacryloxyethyl Phthalate HEMA phthlate, also known as MEP or PAMM, Phthalic Acid Monoethyl Methacrylate is an aromatic, carboxylic acid-containing

Methacryloyloxyethyl Succinate HEMA succinate is one alternative to existing dental adhesive systems. It combines the reactivity of succinic acid with

Monomer Blend (BISGMA/3EDMA:50/50) To simplify your formulation processes, we provide bis GMA already diluted in a 50:50 ratio with TEGDMA. Shipped in

Monomer Blend (BISGMA/3EDMA:80/20) To simplify your formulation processes, we provide bis GMA already diluted in a 80:20 ratio with TEGDMA. Shipped in

Neopentylglycol Dimethacrylate with BHT Neopentylglycol dimethacrylate or NPGDMA is a low viscosity monomer that provides chemical resistance and low

Neopentylglycol Dimethacrylate with HQ Neopentylglycol dimethacrylate or NPGDMA is a low viscosity monomer that provides chemical resistance and low

Neopentylglycol Dimethacrylate with MEHQ Neopentylglycol dimethacrylate or NPGDMA is a low viscosity monomer that provides chemical resistance and low

PEG 1000 Dimethacrylate This is a higher molecular weight crosslinking agent. It can be used for dental applications as well as cements and sealers.

PEG 400 Dimethacrylate The additional ethylene glycol molecules increase the reactivity of this difunctional monomer. Shipped in standard packages of

Poly(ethylene Glycol 200) Dimethacrylate This material is commonly used as a crosslinking agent for free radical polymerization or in reactive

Pyromellitate or Pyromellitic Dianhydride Glycerol Dimethacrylate Adduct PMGDM is now available without any diluent. To use this neat material,

Pyromellitic Dimethacrylate, PMDM Pyromellitic Dimethacrylate or PMDM, has the ability to bond to various substrates when used alone or in conjunction

Sodium Salt of N-tolylglycine glycidylmethacrylate, NTG-GMA The Sodium Salt of NTG-GMA is an adhesive that bridges the gap between hydrophobic and

Strontium Borosilicate Glass Our Strontium Borosilicate glasses have the lowest refractive indices (1.500) of our glass filler products. They also

Tetraethyleneglycol Dimethacrylate with MEHQ The addition of an ethylene oxide unit to this product increases its reactivity and water absorptivity.

Tetrahydrofurfuryl Methacrylate with BHT THFMA is a polar methacrylate containing a five-membered heterocyclic group that works well as an adhesion

Tetrahydrofurfuryl Methacrylate with HQ THFMA is a polar methacrylate containing a five-membered heterocyclic group that works well as an adhesion

Tetrahydrofurfuryl Methacrylate with MEHQ THFMA is a polar methacrylate containing a five-membered heterocyclic group that works well as an adhesion

Triethyleneglycol Dimethacrylate with 100 ppm BHT Triethylene glycol dimethacrylate is a difunctional monomer that has been the foundation of many

Triethyleneglycol Dimethacrylate with 100 ppm MEHQ Triethylene glycol dimethacrylate is a difunctional monomer that has been the foundation of many

Triethyleneglycol Dimethacrylate with 30 ppm HQ Triethylene glycol dimethacrylate is a difunctional monomer that has been the foundation of many

Triethyleneglycol Dimethacrylate with 60 - 80 ppm HQ Triethylene glycol dimethacrylate is a difunctional monomer that has been the foundation of many

Trimethylolpropane Trimethacrylate with 100 ppm BHT Trimethylolpropane trimethacrylate or TMPTMA is a unique trifunctional monomer because of its low

Trimethylolpropane Trimethacrylate with 100 ppm MEHQ Trimethylolpropane trimethacrylate or TMPTMA is a unique trifunctional monomer because of its low

Urethane Dimethacrylate Urethane Dimethacrylates are often used in light-cure systems. Our X-850-0000, UDMA, cures to form a hard, glassy surface that

Urethane Dimethacrylate IPDI UDMA-IPDI has a higher viscosity than our X-850-0000, urethane dimethacrylate.  The high molecular weight of X-851-0000